• Prev
  • Next

Lean Principles Help Drive Software Value

Software value

Implementing new strategies typically requires significant change within an organization, which often impacts the culture. This is also the case when establishing new software value strategies. Organizations must first adopt the mindset to use business value as a metric for driving successful software development initiatives, and then they must optimize the necessary processes to ensure those value metrics are reached.

One practice that can go hand-in-hand with driving software value is lean software development. Many of the principles associated with lean are relevant in the discussion about increasing software value.    

An author I often reference, Donald Reinertsen, wrote a book in 2009 titled “The Principles of Product Development Flow: Second Generation Lean Product Development.”  Of the eight lean principles Reinertsen describes in his book, I suggest the following priorities for executives as they start to shift the organizational culture to lean software engineering at the strategic level:

  • Economics – the executive team needs to focus on maximizing the flow of value through software by assigning relative business value to projects or epics at the strategic level.  Reinertsen emphasizes using the cost of delay as a default metric
  • Queues – systemic or temporary bottlenecks must be easily and quickly identified and removed
  • Batch Size – inputs should be kept as small as possible to achieve a more efficient flow in the pipeline
  • WIP Constraints – Work-in-Progress limitations must be put in place at each phase of the process to minimize queues between process steps and improve focus on projects under consideration
  • Decentralized Control – executives prioritize the backlog and then the staff decides what to pull from the backlog first based on that prioritization.

Implementing these principles can go a long way in driving software value, but they will also require a change in the way things are done, which can often uproot a corporate culture. As with most strategic changes within an organization, the changes required to successfully implement lean principles for software development must be communicated across the organization at all levels. This communication is necessary to ensure the processes and reasons for these processes are clearly understood.  

Do you implement lean principles in your software development initiatives? If so, which lean principles have you found most effective in driving software value?

Mike Harris


Written by Michael D. Harris at 05:00
Categories :

How Can We Optimize Our SDLC to Maximize Demonstrable Value to the Business?

(You can download this report here.)

Scope of this Report

This report investigates how changes to the SDLC (Software Development Lifecycle) can improve the delivery of demonstrable value to the business. We consider how we might measure “demonstrable value” in a way that the business will understand. We review the theory of “Lean Software Engineering” and we suggest some ways that the theory can be applied to optimize different SDLCs. Finally, we discuss the importance of Value Visualization – requiring each story or requirement in the SDLC to have a demonstrable and highly visible set of business value criteria to drive tactical decision-making.

What is “Demonstrable Value to the Business?"

Basically, most software development organizations are driven by demands (or possibly polite requests) from the business(es) that funds the software development. This is not all the work they do because some work is self-generated, either from the software development group or the rest of IT, but, generally, this second category of work still has to be accepted for funding by the business and prioritized against business needs.

So, “Demonstrable Value to the Business” could be simply delivering to the business what it asks and doing so in accordance with the “iron triangle” of "in scope, on time and on budget." In “The Business Value of IT,” Harris, Herron and Iwanicki argue that “business value” tends to be in the eye of the beholder. While this is an important ingredient of the definition, it is not sufficient. Some rigour must be applied beyond simple customer satisfaction because, at the end of the day, the success of an organization will almost always be judged in monetary terms. Even non-profits must be able to stick within the available budget while delighting customers.

Inevitably, the best way to introduce objectivity into a business value discussion is to follow the money, however difficult and apparently unjustified this may seem to the participants. Certainly, there are value types that cannot be measured in dollars and cents, but we would argue that such situations are relatively rare in the business of software development. Hence, while we would always include customer satisfaction when assessing business value, we believe that “demonstrable value” requires the objectivity of financial metrics.

Lean Software Engineering

In our November 2014 DCG Trusted Advisor report, we investigated the meaning of the term “Lean Software Engineering.” That report is a good starting point and recommended reading for this report. To summarize the key points of relevance to this report:

  • The Poppendiecks (Mary and Tom) have proposed seven principles of Lean Software Development:
    - Eliminate Waste
    - Build Quality In
    - Create Knowledge
    - Defer Commitment
    - Deliver Fast
    - Respect People
    - Optimize the Whole
  • Lean software engineering is not an SDLC but an optimization philosophy that can be applied to all SDLCs. The following practices are often associated with implementations of the Lean philosophy in software engineering:
    - Visual Controls including Kanban Boards
    - Cumulative Flow Diagrams
    - Virtual Kanban Systems
    - Small batch sizes
    - Automation
    - Kaizen (or continuous improvement) Events
    - Daily Standup meetings
    - Retrospectives
    - Operations Reviews.
  • Lean principles and practices are applicable to waterfall SDLCs and embodied in Agile SDLCs, although in neither case is there usually 100% compliance.

In considering lean product development flow, Don Reinertsen identifies twelve problems with traditional product development. Reinertsen was referring to traditional waterfall implementations of product development but, as Figure 1 shows, some of these have been addressed by typical Agile implementations but some are only implied. For example, “Absence of WIP constraints”: Few scrum implementations have specific WIP constraints but constraining team size and constraining sprint duration implies a WIP constraint.

Opportunities for Optimization

Of course, there are many variations of the generic SDLC models that arise from local customization to address either the problems we have described or other local issues. Hence, for example, our scores here might be modified (up or down!) by an Agile implementation that is not textbook scrum but some combination of Lean/Scrum/XP. That same is true for modified versions of waterfall, which, for example, have a strong cadence achieved by pipelining requirements/design, development and testing into, say, three month chunks that endlessly repeat. For this reason, in Appendix A, we have added some commentary to the simple scores of Figure 1.

Figure 1: Problems with traditional approaches to Product Development (after Reinertsen) and the degree to which they are addressed today by typical Waterfall (Blue) and Agile (Red) SDLCs. A Reinertsen problem that has been fully-addressed in an SDLC would score a ‘3’.

SDLC Lean Problems

So with the stipulation that the actual SDLC model you are looking at might not score exactly the same way as we have suggested in Figure 1, the greatest opportunities for optimization leap off of the chart:

  • For both SDLC’s
    - Quantify the economics and make them visible at all levels so that they can be used for tactical decisions
    - Make queues explicitly visible at all levels
  • For waterfall:
    - Implement Agile
    - Implement a Lean Kanban system or some other system that:
    Sets Work in Process (WIP) Limits on process steps
    Sets small batch sizes
    Decentralizes control by implement work-pull instead of work-push.
  • AND
  • Focus on optimizing end-to-end value throughput instead of focusing on resource utilization that may maximize local productivity at the expense of throughput.

How? The Economic View - Value Visualization

We need to associate a set of economic information with each requirement or story that we want to flow through our SDLC. We propose the minimum set in Figure 2 should be added to each requirement/story in an easily visible (see Figure 3) or electronically accessible way.

Figure 2: The Value Visualization Economic Metrics set for every Requirement/Story

Economic Metrics

As we have learned from Kanban boards in Agile, visualization is very powerful for team decision-making, and so it makes sense to associate the economic value data of Figure 2 with a visual model for which we provide a template in Figure 3 and an example in Figure 4.

Value Visualization Trains

There are some challenges carrying value visualization data through requirement or story decomposition because the business cases that drive the requirements and stories often map to quite high-level requirements and epics, rather than the “small batch” level requirements and stories that we want to see flowing through development. We have learned from at least one client that it does not make sense to have economic value data at the lowest requirement/story level because of the difficulty of breaking up the high-level economic information into ever smaller units. Hence, at some level of decomposition it will be necessary to stop breaking up the economic data and follow three simple rules:

  • Use T-shirts sizes for Value e.g. High, Medium, Low at the lowest levels of story.
  • These T-shirt sizes should be inherited from and the same as the lowest level parent requirement/story for which economic data was available.
  • Implement a control mechanism to ensure that below the lowest of economic data, all child requirements/stories are connected and prioritized together as much as possible.

There must be an associated process for the third main rule. It is possible that a subset of the stories associated with a particular set of economic data could be deployed before all the stories associated with that data are ready for deployment. For example, in some cases, 90% of the value could be realized by deploying 75% of the child stories. In such cases, decisions need to be made and executed about the value of the remaining “orphaned stories.” In short, are they still needed or can they be removed from or deprioritized in the SDLC flow.

The Use of Lean-Kanban

While Agile SDLC’s such as Scrum and SAFe are designed to embody many lean principles, waterfall was not originally designed with lean principles in mind. However, that does not mean that moving to Agile is the only course of action available. If there are good reasons for an organization to stick with waterfall for part of its operations then the application of Lean-Kanban principles can help. After all, Lean principles originally emerged in manufacturing environments that tend to be waterfall in nature (a quick reminder/warning that lean manufacturing and lean software engineering are not the same thing as we have discussed in earlier DCG Trusted Advisor reports).

To move from classic waterfall to a Lean-Kanban model, the following minimal steps need to be taken:

  • Create a product backlog of requirements/stories in priority order
  • [Ideally but not necessarily at first] Add the Value Visualization Data to each requirement/story
  • Create a “Ready” step as the first step in the flow to ensure that requirements/stories do not enter the SDLC until they are ready to be worked. Put a WIP limit of less than 10 on the Ready step
  • Create a “Ready to Deploy” step as the last step in the flow with no WIP limit
  • For each step in the waterfall SDLC (e.g. Analysis, Design, Code, Test), create two sub-steps: “In Progress” and “Done.” Each whole step should have a WIP limit for of less than 10.
  • Allow the staff in each step to pull requirements from the preceding “Ready” or “Done” step if, and only, if bringing in that requirement/story does not exceed their WIP limit. Staff should pull by highest value or WSJF.
  • Use Cumulative flow charts to track and predict bottlenecks and shift resources or WIP limits to optimize value flow.


We are capable of building and running effective Waterfall SDLC’s but they are not necessarily efficient in optimizing value flow. Worse, waterfall SDLC’s are not good at visualizing the data needed to improve value flow and they tend to be poor at implementing lean principles. Agile SDLC’s are much better at implementing Lean principles and so improve value flow but even Agile SDLC’s are not optimal if they do not have a way to include some basic economic data in their tactical decision-making.


  • “The Business Value of IT,” Harris, Herron and Iwanicki, CRC Press, 2008.
  • DCG Trusted Advisor Report, November 2014, “What is meant by the term ‘Lean Software Development,” /insights/publications/ta-archives/lean-software-development/
  • “Implementing Lean Software Development – From Concept to Cash,” Mary and Tom Poppendieck, Addison Wesley, 2007. [Or, indeed, any book by Mary and Tom on this topic!]
  • “The Principles of Product Development Flow – Second Generation Lean Product Development,” Donald G. Reinertsen, Celeritas Publishing, 2009.

Appendix A

Written by Default at 05:00
Categories :

"It's frustrating that there are so many failed software projects when I know from personal experience that it's possible to do so much better - and we can help." 
- Mike Harris, DCG Owner

Subscribe to Our Newsletter
Join over 30,000 other subscribers. Subscribe to our newsletter today!